This chain type assembly machine is used for fully automated assembly of drawing pens. It adopts a speed control combination, a complete set of imported electrical appliances, and a PLC control system. It consists of a touch screen electrical box, pen cover, pen tip, rear plug and other vibrating discs, pen holder cotton core hopper, cylinder mechanism, mechanical transmission mechanism and other parts.

Scope of Application

Used for the assembly of ballpoint pens, covering the entire process of post plug welding, cotton core assembly, pen tip welding, pen tip installation, and back cover closure, with a production capacity of 80-100 pens per minute, suitable for large-scale production of ballpoint pens.

Production Process

After placing the raw materials into each hopper, the cylinder drive achieves precise feeding of the pen tube, and after being transported to the designated position, it is pressurized, plugged, and welded; Then install the ink filled cotton core, weld the pen tip, press the pen tip into the pen tip, and finally cover the back cover to complete the entire assembly process.

Technical Improvements

1.Precise Assembly:

Each step of the assembly process is monitored in real-time by an electric eye, which accurately identifies the installation position, welding strength, and other parameters of the parts. If any deviation is detected, an adjustment mechanism is immediately triggered to ensure the installation accuracy of each component and improve the product qualification rate.

2.Stable Operation:

The core driving unit is constructed using a speed control combination, a complete set of imported electrical appliances, and a PLC control system. High quality electrical components and precise program control are used to reduce the occurrence of equipment failures during operation, ensure production continuity, and avoid production line stagnation caused by equipment failures.

3.Easy Operation:

Equipped with a touch screen electrical box, all production parameters can be set and adjusted through the touch screen. Real time display of equipment operation status, production capacity, fault prompts, and other information during the production process makes it easy for operators to monitor the production process and improve the operating experience.

Mechanical Parameters

1.Machine Dimensions:

280×100×130cm, weight 1200kg.

2.Motor Power:

1.5KW, suitable for 3-phase 220V/380V power supply.

3.Production Capacity:

80-100 pieces per minute.